Most Christmas electrical problems come from the same few things: overloaded sockets and extension leads, old or damaged lights, indoor lights used outside, and cables run where they get trapped or wet. Check every set before you plug it in, spread the load across sockets, use proper outdoor-rated lights and leads outside, and switch everything off at night. If your electrics keep tripping or you want a permanent outdoor socket, our electrical team can help. We work across Oxford, Witney and the surrounding area.
Check your lights before they go up
Lights that have spent a year in the loft can get damaged. Before plugging them in:
- Look for cracked or broken bulbs, frayed wires and damaged plugs
- Check the cable hasn’t been chewed, crushed or kinked
- Make sure the transformer or plug has a UK safety mark
- Throw away any set that’s damaged, rather than taping it up
Older lights that run on mains voltage can get hot. Modern LED sets run much cooler and use far less electricity.
Don’t overload sockets and extension leads
At Christmas, sockets near the tree often end up with lights, a TV, games consoles and phone chargers all plugged in at once.
- Use a single extension lead per socket. Don’t plug one extension lead into another.
- Use a lead with a built-in surge protector and fuse
- Check the lead’s maximum rating and don’t exceed it
- Fully unwind cable reels, as coiled leads can overheat
- Keep leads out from under rugs, where they can overheat or get damaged
If you’re always short of sockets, it may be worth adding more rather than relying on adapters.
Outdoor lights need outdoor kit
Lights and leads used outside have to cope with rain and frost.
- Only use lights marked as suitable for outdoor use
- Use outdoor-rated extension leads and connectors, or a weatherproof outdoor socket
- Don’t run a lead through a window or door where it can get trapped
- Make sure outdoor circuits are protected by an RCD, which cuts the power fast if something goes wrong
A permanent outdoor socket, fitted by a qualified electrician, is safer and tidier than trailing a lead from the kitchen every year.
Switch off at night and when you go out
Turn lights off at the plug before bed and whenever the house is empty. Use a timer plug if you like the lights on in the evening. Keep lights away from curtains, paper decorations and the tree’s dry needles. Make sure your smoke alarms work, and test them before the holidays.
When your electrics keep tripping
If the power trips when you plug in lights, don’t keep resetting it. The trip switch or RCD is telling you something is wrong. Common causes include:
- A faulty set of lights or extension lead
- Water getting into outdoor connections
- Too much load on one circuit
- An underlying fault in your wiring
Unplug everything on that circuit, reset the switch, then plug things back in one at a time to find the culprit. If it still trips with nothing plugged in, call an electrician.
Warning signs that need professional attention include scorch marks around sockets, a burning smell, buzzing or crackling, and plugs or sockets that feel hot.
Electrical safety in Oxfordshire homes
Older homes around Oxford, Thame and the Cotswold edge villages can have fewer sockets than modern life needs, and wiring that’s been extended over the years. Period cottages and farmhouses sometimes have outbuildings and gardens wired with temporary leads that were never meant to stay. If you’re not sure about the state of your wiring, our post on signs your wiring needs checking explains what to look for.
Frequently asked questions
Can I plug Christmas lights into an extension lead?
Yes, as long as the lead is in good condition, rated for the load and plugged directly into a wall socket. Don’t daisy-chain extension leads together, and avoid plugging high-powered appliances such as heaters into the same lead. Outside, only use leads and connectors rated for outdoor use.
Is it safe to leave Christmas lights on overnight?
It’s best not to. Turn them off at the plug before bed and when you’re out. Even modern LED lights can develop faults, and a damaged cable or overloaded socket is a fire risk. A timer plug is an easy way to have them on in the evening without worrying about switching them off.
Do I need an electrician to fit an outdoor socket?
Yes. An outdoor socket needs to be weatherproof, correctly wired and protected by an RCD, and the work may need to be notified under Building Regulations. A qualified electrician can fit it safely and certify the work. It’s a safer long-term option than running leads through windows every winter.
Want your electrics checked before Christmas?
Give us a call on 01865 602 994 or drop us a message and we’ll check your sockets and circuits, or fit an outdoor socket ready for the lights.